| NOTES: |
1: |
Figures in parentheses denote ply
rating for which
boldface loads and inflations are maximum. |
| 2: |
For operations at other speeds,
including
skid-steer/mini-loader service, the loads in the above table
may be
changed as shown at right with no change in inflation
pressure. |
|
| MAX.
SPEED |
%
CHANGE IN ABOVE
|
| Stationary |
+165% |
| Creep
* |
+100% |
| 5
mph (10 km/h) |
+58% |
| 10
mph (15 km/h) |
+32% |
| 20
mph (30 km/h) |
+12% |
|
| FOR RIM AND
WHEEL LOAD INFORMATION, SEE IMPORTANT NOTES IN CHARTS I
AND II IN GENERAL FARM TIRE INFORMATION |
*Creep speed is a travel rate of not over 200 feet (61m) in a
30-minute period.
|