| NOTES: |
1: |
Figures in parentheses denote ply
rating for which
bold face loads and inflations are maximum. |
| 2: |
Maximum shipping pressures are the
maximum
inflation pressures for the tire sizes and ply ratings
shown. |
| 3: |
For above tires used in cyclic loading
service
(excluding hillside combines) with speeds up to 5 MPH,
above loads
may be increased 67%. This load increase applies to
vehicles that operate up an 11° slope (20%
grade). |
| 4: |
Tire load limits at various speeds with no
change in pressure are shown to the right. |
|
| MAX.
SPEED |
%
CHANGE IN ABOVE
|
| 10
MPH / 15 KM/H |
+50%
(except hillside combines) |
| 15
MPH / 25 KM/H |
+28%
(except hillside combines) |
| 20
MPH / 30 KM/H |
+11% |
| 25
MPH / 40 KM/H |
SAME |
| 30
MPH / 50 KM/H |
-9% (F-3 tires
only) |
|
| FOR RIM AND
WHEEL LOAD INFORMATION, SEE IMPORTANT NOTES IN CHARTS I
AND II IN GENERAL FARM TIRE INFORMATION |
|